text.skipToContent text.skipToNavigation
  • NEWS
    16 jul. 2021
    The fluorescent tube goes out!
    The most striking measure is the phasing out of obsolete fluorescent lamps, such as T2, T8 and T12 (popularly known as TL tubes). Also notable is the phasing out of halogen lamps and compact fluorescent lamps (popularly known as low-energy lamps). These lighting sources must be replaced because they are not energy-efficient and because there are sufficient energy-efficient alternatives on the market. With this measure, the commission aims to save almost 42 TWh in 2030.
    Read more
  • NEWS
    16 jul. 2021
    That sounds safe
    The PSENmlock door handle module gives you a handle with an integrated actuator and an integrated escape release – perfect for the safety gate system PSENmlock. The yellow handle (outside) enables extension of the actuator to open or close the gate. The escape release is operated with the red handle (inside). The PSENmlock door handle module is suitable for fitting on the inside and the outside of the gate as well as for right-hinged and left-hinged gates. It has a locking insert for up to five locks to prevent the machine from restarting and can be used with the coded and fully coded PSENmlock switches.
    Read more
  • NEWS
    15 jul. 2021
    You'd rather know in advance
    Components of an automation system are normally used for a very long time during their life cycle. It is therefore questionable whether the component is still available in the event of failure. It is therefore important to manage the life cycle proactively. Timely information about the availability of spare parts, for example, is one of the most important planning criteria here.
    Read more
  • NEWS
    15 jul. 2021
    Reliability is a choice
    A reliable power supply is important for the continuity of your production process. Phoenix Contact offers solutions for a systematic design of your power supply in control cabinets. By selecting solutions within the Complete Line program, products are well matched with the aim of maximizing your installation's uptime.
    Read more
  • NEWS
    5 jul. 2021
    Prepare to adjust
    Electric motors are major consumers in industry when it comes to energy consumption. As much as 70% of the electricity produced goes to electrically driven systems. For heavy industries, this can be as much as 90%. Since 2009, the EU has been setting minimum energy efficiency requirements for new electric motors from 0.75 to 375 kW with the Ecodesign Directive 640/2009 in order to encourage manufacturers to bring more energy-efficient products to market.
    Read more
  • NEWS
    5 jul. 2021
    Two smart brothers
    The Fluke 377 FC and 378 FC True-rms Clamp Meters use FieldSense™ technology to make testing faster and safer, all without touching a live conductor. You get accurate voltage and current measurements through the clamp jaw. Simply clip the black test lead to any electrical ground, put the clamp jaw around the conductor and see reliable, accurate voltage and current values on the display.
    Read more
  • NEWS
    2 jul. 2021
    Starting slowly prevents failure
    Over 40% of all the energy consumed worldwide goes into industry. Two thirds of it is consumed by motors. A not insignificant proportion of these do not run optimally. The wear and tear caused by frequent starting and stopping causes unplanned downtime and shortens the operational life. There must be a better way of doing this. And it can be: with softstarters from ABB.
    Read more
  • NEWS
    1 jul. 2021
    Well prepared
    You may think: "if my frequency drive fails, I'll order a new one right away". But is a one-to-one replacement still available? At what point do you want to have this information? When production stops, or perhaps a little earlier? You may not realise it, but a Danfoss AC drive often lasts more than 10 years.
    Read more
  • NEWS
    1 jul. 2021
    Festo can do it with anyone
    Connectivity at all levels to make machines even more efficient. Festo makes this possible with an automation platform that consists of various high-quality electrical components. The CMMT servo drives are easy to integrate due to their brand-independent connectivity with PLC, motor and mechanics. This makes CMMT ideally suited for advanced and challenging positioning applications.
    Read more
  • NEWS
    11 jun. 2021
    I've never made money that easy
    It concerns all of us: Climate change and its consequences. That is why companies put a lot of time and money into developing new technologies and services in the field of energy efficiency. In doing so, they offer that your machines and systems consume less energy, emit less CO2 and reduce operating costs, while increasing the sustainability of your production processes.
    Read more
  • NEWS
    3 jun. 2021
    Quicker and smarter
    Using plug-and-play I/O modules on your standard components, you can bring I/Os to the components without redesigning the machine control or replacing components. With a single cable and one click, you connect all the I/Os on your normally 'non-intelligent' Eaton components that you now use in your current conventional control. This makes them intelligent without replacing them. Eaton's intelligent 'SmartWire' cabling solution communicates in this way both inside and outside the control cabinet, and also brings energy to the relevant components. This allows you to not only handle the I/O on the components, but also read valuable data from your processes and from the components themselves. As a result, you can easily and quickly update your control system to Industry 4.0. Whether that's today, tomorrow or in a few years.
    Read more
  • NEWS
    3 jun. 2021
    Easy. Flexible. Efficient
    According to the study “Panel building 4.0“ by the Institute for Control Engineering of Machine Tools and Manufacturing Units of the University of Stuttgart in classic panel building, 72 % of the working time in the installation phase is required for wiring and mechanical assembly.
    Read more
  • NEWS
    28 mei 2021
    SIMATIC Safety Integrated - Failsafe and standard automation with a single controller!
    When it comes to protecting operators, safety is a top priority for your new production machines. Therefore, you should rely on the modern controllers and other hard and software of SIMATIC Safety Integrated. Find out why so many machine builders have been using these parts for more than a decade now.
    Read more
  • NEWS
    22 apr. 2021
    From simple to software
    Got a simple system that you need to keep safe to SIL 3 and PL e levels? Look no further than the SIRIUS 3SK1 Serie of safety relays from Siemens. Designed for flexibility and ease of integration, the platform is targeted at simple safety-critical operations such as emergency stops, two-hand operator panels, light curtains up to protective door monitoring. The series is constructed as a clear modular system, so that users of installations can quickly, easily and cost-effectively put together a good and safe configuration.
    Read more
  • NEWS
    20 apr. 2021
    From air to better
    The CPX-AP-I remote I/O system from Festo is designed to easily integrate various I/O modules and \(even existing\) valve terminals with the most important PLC systems via the most common field buses. As a result, fewer components require a fieldbus module.
    Read more
  • NEWS
    19 apr. 2021
    Leuze plays it safe!
    With its long-standing presence in the field of machine safety, Leuze is a proven specialist with its non-contact detection solutions: the MLD300/500 family of access guarding is used in a wide variety of environments. This concerns the protection against deliberate or accidental entry into danger zones such as at robot cells, pallet wrappers, stacking machines or other dangerous workplaces.
    Read more
  • NEWS
    15 apr. 2021
    Serendipity
    The new Quint DC UPS uninterruptible power supply can be integrated into established networks, and continues to supply systems without interruption even in the event of a mains failure. It can be integrated into your network easily and flexibly, thanks to the integrated interface for PROFINET, EtherNet/IP™, EtherCAT or USB. The device is available with all network technologies in each of the four performance classes 5 A, 10 A, 20 A und 40 A.
    Read more
  • NEWS
    15 apr. 2021
    A Good Soil
    In industry, reliability and availability are written in capital letters. Machine manufacturers, installers and OEMs must rely on the power supply to ensure machine continuity. The CP-D and CP-E series are affordable power supplies of trusted ABB quality.
    Read more
  • NEWS
    12 apr. 2021
    Changing colours
    Eaton expands the range of RMQ multi-color LED elements with 2 additional models. The LED elements are now also available in a SmartWire-DT version for personalized IoT-ready applications and in a pre-wired C22 version for rugged environments.
    Read more
  • NEWS
    1 apr. 2021
    A new shoot on the tree
    The Harmony ST6 series of HMI displays is specially developed for simple machines where intuitive operation, stylish design and powerful visualizations are important in addition to the price-performance ratio. Besides the existing Basic HMI \(HMIST6\) and the Basic Web HMI \(HMISTW6\), the Harmony ST6 series has now been expanded with a third option, the STM6 Modular HMI \(HMISTM6\).
    Read more
  • NEWS
    26 mrt. 2021
    A bag full of protection
    Meet the different forms of hearing protection from 3M Which headset or earplug best fits in your specific situation? Try it out and order the sample bag with 6 different designs Test what suits you best. Because good hearing protection is very important. Fill in your details and we will send the sample bag to you today You can try out all units free of charge for two weeks, after which we will come and collect the sample bag again.
    Read more
  • NEWS
    26 mrt. 2021
    Headsets with communication
    3M™ PELTOR™ Communication Headsets lead the world as headsets for use in hazardous, noisy environments where two-way communication and active listening are required. As a 3M distributor, itsme has an extensive range of headsets which can be used in different environments and which meet the majority of requirements for both communication and hearing protection. Our specialist can provide advice on using the right headset in your situation.
    Read more
  • NEWS
    17 mrt. 2021
    Digital foot scan and fitting service on location
    Unique in the Netherlands is the PASBUS that comes to you on location. A fully equipped bus equipped as a mobile fitting service. EMMA's qualified employees always find shoes that fit the personal preferences and profession of the employees.
    Read more
  • NEWS
    17 mrt. 2021
    Lighting in an emergency
    A safe work environment with the Harmony Illuminated emergency stop button An emergency stop button is a mechanism that can be used to stop a machine's operation in one action. Directives require the mandatory installation of an emergency stop button at least at each machine control station. Schneider Electric introduces a new range of illuminated emergency stop buttons that contribute to a safer working environment.
    Read more
  • NEWS
    15 mrt. 2021
    Ditch the clipboard
    With so many inspections in your day, it can be hard to remember what you saw and where you inspected. Maybe you carry around a clipboard to jot down notes. The TiS55+ and TiS75+ come with built-in personal assistants, which means you can finally ditch the clipboard and have all the information you need embedded in the images you save
    Read more
  • 1(current)
  • 2
  • 3