Schneider Electric - PanelSeT SFN replaces Spacial SF floor-standing enclosures
The new generation of PanelSeT SFN floor-standing enclosures is the successor and updated version of the successful Spacial SF series. In the coming months, the floor-standing enclosures from the Spacial SF series will continue to be available but these will eventually be replaced in their entirety by the updated PanelSeT SFN series.
Switch to PanelSeT SFN floor standing enclosures
Because the accessories and mounting points of the SFN series and SF series floor-standing enclosures have remained the same, the assembly is completely similar, interchangeable and linkable. Integration with Spacial SF is seamless, allowing easy retrofit while maintaining identical dimensions, symmetry, mechanical properties, mounting points and certifications.
Part numbers in the new SFN series can be identified by the addition -N, from NSYSF to NSYSFN. Schneider Electric Universal Enclosures' Sales Specialists and Oosterberg's industry team can assist in the transition from Spacial SF to PanelSeT SFN.
Sustainably manufactured
PanelSeT SFN is future-ready and specially designed with environmental regulations in mind. PanelSeT SFN floor standing enclosures are made from 50% recycled steel and is manufactured using renewable energy sources. As a result, there is a 34% reduction in CO2 emissions compared to the previous SF series. In addition, the product features eco-friendly packaging that consists of 80% recycled cardboard and virtually no plastic.
Robust design
The new patented frame design with bolted structure carries up to 1500 kg while remaining flexible. This is a significant improvement in load capacity over the previous Spacial SF series, where the load capacity was 1000 kg.
Simplified installation
The PanelSeT SFN features an advanced designed system that significantly simplifies the installation process. It also features a semi-closed door hinge, making door removal very easy. The mounting plate is faster and safer to install thanks to the quick-fix bracket, which allows for accelerated implementation. The bolts of the side panels, for example, are secured so you cannot lose them.
High-quality protection
The robust, galvanized, steel enclosures are enriched with an epoxy-polyester powder coating, making it suitable for both indoor and outdoor applications. PanelSeT SFN meets the highest standards for the protection of electrical components. It features an IP55 protection rating, which provides resistance to water, dirt, dust and non-corrosive materials. In addition, the enclosure boasts a K10 protection rating, making it resistant to mechanical shock.
Flexible and adaptable
The PanelSeT SFN is available in various sizes and combinations. The enclosures are freely configurable and are available as a standard model or kit. Discover a range of enclosures tailored to your needs. The modular design allows up to 600 combinations. In addition, it is possible to provide machining such as hole pattern or customer specific dimensions via customization or co-engineering.
Stay up to date with the latest news:
-
Schneider Electric - Harmony relays for various industrial applicationsRead moreWith Schneider Electric's Harmony relay range, you choose a wide range and the most complete selection of relays for a variety of industrial applications. Harmony relays include conventional electromechanical relays, solid-state relays, guard relays, time relays and NFC control & timer relays. The range is designed to be perfectly and easily mounted in control cabinets and electrical panels. Improve operational efficiency and optimise the availability of your machines and systems.
-
Schneider Electric - PanelSeT SFNRead moreThe new generation of floor-standing enclosures PanelSeT SFN is the improved version of the successful Spacial SF. Because the accessories and mounting points of the SFN and SF enclosures have remained the same, they are 100% interchangeable and linkable. - Sustainable: The PanelSeT SFN is made of 50% recycled steel and manufactured with renewable energy sources, reducing CO2 emissions by 34%. We can prove this with a document, called a PEP material passport. Documents like this come in handy when making a sustainability report in accordance with CSRD regulations. PanelSeT SFN is future-ready and specially designed with environmental regulations in mind. It also features eco-friendly packaging with 80% recycled cardboard and almost no plastic.
-
Schneider Electric - ClimaSys: prevent downtimeRead moreDowntime is often caused by overheating. With good cabinet climate control, you can prevent this. In addition, proper climate control provides a sustainable solution. It has been shown that components last up to two times longer at the right operating temperature. Prevention of failures Ensuring continuity and increasing productivity are often goals of factories. This comes down to preventing breakdowns that can lead to downtime. Proper climate control within the cabinet is essential here. If components overheat, this can lead to downtime or shortened service life. Downtime is often caused by overheating. You can prevent this with proper temperature management. Want to make the right choices when it comes to climate control?
-
Schneider Electric - Harmony HubRead moreHarmony Hub is a wireless system based on the generic ZigBee communication protocol for your existing industrial plants and processes. Collect concrete signals from a control panel and generate data via wireless components such as limit switches, push buttons and sensors.
Check out our other success stories:
-
Dymotec - Open Lines in a ‘Perfect Storm’Read moreCOVID-19 and global component scarcity threw the industry into a ‘perfect storm’. Industrial automator Dymotec and Breemes kept the phone lines constantly open to tackle the scarcity problem together with creativity and proactivity. Dymotec in Olen (B) focuses on industrial automation spanning a broad spectrum of industries, from food and pharma to logistics and metal. The company has been around for 30 years and joined the Jeco Energies Group in 2022. Dymotec now has some 50 employees and also has a flexible shell with technicians, programmers and project engineers. Ever since its establishment, the company from Kempen has had a relationship with (the predecessors of) Breemes.
-
Enduro - Complete package for heavy-duty workRead moreEnduro Softslings builds machines for the manufacture of its own heavy lifting soft slings. For a new machine, it called in itsme for the full package: advice on the drives, supply of components and programming of the controls. “We completed the entire project in just over six months. That’s fast for such a specialised machine.”
-
Stimac - Good technical support for ever-changing specificationsRead moreIf the description for an automation project is clear from the start, it is easy for the industrial automation specialist to give it substance. In practice, however, specifications often change during the course of a project. This happened to Stimac/SNK when designing the control technology for a horticultural machine. For the problems that arose during the process, itsme quickly provided Stimac/SNK with a solution. “When a customer calls us, we respond immediately. So it’s nice to have a supplier like itsme who can also help immediately.”
-
Azteq - Warm Cooperation on Solar Thermal EnergyRead moreAzteq aims to revolutionise European green heat technologies on an industrial scale and is developing solar heating systems to do so. The Belgian start-up cooperates in projects with technical service providers, who in turn call upon Breemes for advice and the supply of components. For a major project in Seville, there were challenges regarding the delivery times of the decentralised PLCs and on how they could communicate with each other in the large facility.
Why not take a look at these trainings we offer:
-
TIAP-NETWORKRead moreavailable in Dutch
-
PROFIBUS-Troubleshooting & MaintenanceRead moreavailable in Dutch
-
FREQ-FC300 - Danfoss Frequency Converters FC300Read moreThe workshop provides information on the design, commissioning and maintenance of the FC 300 frequency converter and its applications.
-
SE-FREQ-Altivar - Schneider Electric Altivar frequency converterRead moreThe participant is able to project, detect and correct errors in the entire application of frequency converters in the building for HVAC applications, for example heating and ventilation. You will also learn: to operate behavior of the three-phase asynchronous motor, the mechanics of the drive, harmonic and cos phi, the technology of the frequency converters Altivar 212 and more.