Kaeser rotary screw blower EBS 410
The EBS 410 rotary screw blower from Kaeser represents a new milestone in the development of oil-free compression blower technology, designed especially with water industry applications in mind.
With a flow rate of 10 – 40 m³/min and pressure differentials from 0.3 to 1.1, as well as a selection of motors ranging from 22 to 75 kW, the innovative EBS 410 sets new standards in terms of energy efficiency, space-saving design and automation.
The SFC version is equipped with a frequency converter and a synchronous reluctance motor – a slip-free design that combines all the advantages of high efficiency permanent-magnet motors with those of robust, service-friendly asynchronous motors. Thanks to variable speed control, the flow rate can be adjusted as required and a control range of 1:4 is achieved, which allows exceptionally dynamic operation.
The STC version is now equipped with an energy-saving IE4 Super Premium Efficiency motor that reduces energy consumption and therefore costs, making the STC version more efficient than ever before.
With both versions, power transmission from the motor to the airend takes place via loss-free and maintenance-free gearing, which results in an up to 8 % improvement in specific power compared to the previous model. The complete machine achieves an isentropic efficiency of up to 80%, representing the pinnacle of performance for oil-free compression machines. In order to ensure that the specified performance figures are translated into reality, Kaeser guarantees performance in accordance with the strict tolerances of the ISO 1217-C/E standard.
Furthermore, efficiency remains constant across the entire control range and flow rate is virtually unaffected by pressure fluctuations. This allows the blower to be precisely regulated and adjusted at all times via the master control system. This achieves even greater energy savings and also ensures effortless integration with other control technologies.
These new models will be available in two different sizes – up to 37 kW and 75 kW respectively. They not only stand out on account of their attractive, contemporary design, but they can also be installed side-by-side, leading to considerable space savings. The 37 kW version in particular is impressively compact, featuring a footprint of only 2.2 m² (or 2.6 m² for the 75 kW version).
EBS 410 rotary screw blowers are delivered ready for immediate connection, including controller and frequency converter, or star-delta starter. All units are CE and EMC-certified, thereby minimising the planning, construction, certification, documentation and commissioning costs for planners, operators and plant manufacturers. Last but not least, highly effective sound and pulsation damping ensure exceptionally quiet operation.
The EBS 410 rotary screw blower from Kaeser represents a new milestone in the development of oil-free compression blower technology, designed especially with water industry applications in mind.
Stay up to date with the latest news:
-
Rittal - VR pedestalRead moreDelve into the world of the VX plinth plinth system - a successor that takes your cabinet arrangement to the next level. More stability, but also flawless installation. Experience the evolution of your workspace today! Rittal strives to constantly refine and improve its products. As part of this process, the VX plinth plinth system has been redesigned this product has been available since 1 March 2024.
-
Siemens - SINAMICS G220 variable speed drive now also in IP55Read moreIn addition to the previously released IP20 variant of the SINAMICS G220 variable speed drive, the IP55 version of this innovative drive is now also available. This version comes standard with coated circuit boards that make the inverter resistant even outside the control cabinet to aggressive influences in a harsh industrial environment. As an option, a housing-mounted isolating switch can also be supplied to ensure safe disconnection of voltage without any other external components.
-
News - Fluke - 87-V digital multimeterRead moreTechnological advances now allow accurate electrical measurements to be taken during installation and maintenance using a digital multimeter (DMM), allowing technicians to diagnose problems that lead to premature failure.
-
Pilz: PSENmlock mini and PSENslock 2Read moreWhen securing fences, a wide variety of factors such as the fence type, the respective installation situation and the specific use must be taken into account depending on the application. For this purpose, Pilz is expanding its range in the field of safety interlocks with two new sensors immediately: PSENmlock mini for space-critical applications and PSENslock 2
Check out our other success stories:
-
Dymotec - Open Lines in a ‘Perfect Storm’Read moreCOVID-19 and global component scarcity threw the industry into a ‘perfect storm’. Industrial automator Dymotec and Breemes kept the phone lines constantly open to tackle the scarcity problem together with creativity and proactivity. Dymotec in Olen (B) focuses on industrial automation spanning a broad spectrum of industries, from food and pharma to logistics and metal. The company has been around for 30 years and joined the Jeco Energies Group in 2022. Dymotec now has some 50 employees and also has a flexible shell with technicians, programmers and project engineers. Ever since its establishment, the company from Kempen has had a relationship with (the predecessors of) Breemes.
-
Enduro - Complete package for heavy-duty workRead moreEnduro Softslings builds machines for the manufacture of its own heavy lifting soft slings. For a new machine, it called in itsme for the full package: advice on the drives, supply of components and programming of the controls. “We completed the entire project in just over six months. That’s fast for such a specialised machine.”
-
Stimac - Good technical support for ever-changing specificationsRead moreIf the description for an automation project is clear from the start, it is easy for the industrial automation specialist to give it substance. In practice, however, specifications often change during the course of a project. This happened to Stimac/SNK when designing the control technology for a horticultural machine. For the problems that arose during the process, itsme quickly provided Stimac/SNK with a solution. “When a customer calls us, we respond immediately. So it’s nice to have a supplier like itsme who can also help immediately.”
-
Innovatec - Hatching Better ProcurementRead moreInnovatec Hatchery Automation launched a process of professionalisation for its procurement process last year. The company partnered with itsme because of its technical expertise, logistics concepts and intensive contacts with manufacturers. “First we were dating, but now we’re thinking about moving in together.”