Arc detection - monitor your installation anytime, anywhere
ABB's arc detectors provide maximum protection for people, valuables and buildings. The detectors prevent fires from arcing. A fast response time is literally and figuratively of vital importance. Combining that with real-time monitoring creates a reliable total solution for arc detection. ABB offers that solution. 
An arc can injure people and damage equipment, making it one of the most serious hazards in an electrical installation. Electric arcs cause an enormous amount of energy that can reach temperatures of over 19,000 degrees Celsius, hotter than the surface of the sun. Although exact figures of arc incidents in low-voltage installations are difficult to ascertain, it is generally believed that dozens of incidents occur annually.
Fastest reaction time
When an arc occurs, one of the most critical factors is the time until the arc is interrupted: the earlier the arc is interrupted, the less energy can be released. With a response time of less than one millisecond, the combination of E6 expansion module with the TVOC-2 arc detection system is the most reliable solution of its kind. The fastest shutdown times of the TVOC-2 are combined with the capability of zone selectivity, real-time updates via the unit's HMI, Modbus RTU communication and remote monitoring by ABB Ability™ Energy & Asset Manager. Users are thereby immediately notified when detectors are disabled or disconnected. 
Reliable operation
The E6 expansion module is quick, easy and calibration-free on-site installation and also minimizes downtime after an arc. Monitoring of the arc detectors ensures operation of the detectors and continuous operation of installations. And because the detectors are tested every 10 seconds, maintenance costs drop significantly.
Stay up to date with the latest news:
-
Schneider Electric - Simplified wiringRead moreThanks to intuitive spring clips, TeSys Deca Snap-In enables contactors and motor protection switches to be connected in just two seconds per wire. That is up to 96% faster than traditional connection methods.
-
nVent ERIFLEX -Distribution blocksRead morenVent ERIFLEX distribution blocks: ideal for connecting the power cable or output of machines or industrial equipment (such as inverters, air conditioners, etc.) and offering high short-circuit resistance, time savings and reliability in every switch cabinet.
-
Eaton - S711 softstarterRead moreThe S711 sets new standards in soft start technology. This brand new soft starter is not only smarter and more powerful, but also equipped with advanced control and protection functions. In addition, it introduces a groundbreaking service interface based on Bluetooth LE (Low Energy).
-
Eaton - Eaton – Ultra-Compact DM1 General Purpose DrivesRead moreEaton’s PowerXL DM1 variable frequency drives deliver maximum functionality in an ultra-compact housing, making them ideal for applications with limited installation space. Despite their small size, they offer the full capabilities of a universal drive, including pump and HVAC settings as well as control of both conventional asynchronous and PM motors.
Check out our other success stories:
-
Sekisui AlveoRead moreFoam producer Sekisui Alveo has a large factory in Roermond. To support production and maintenance, warehouses and distribution points with thousands of different items are spread across the various halls. Think spare parts, personal protection equipment and consumables. The company cooperates intensively with itsme for management, such as recently with the step-by-step introduction of vendor managed inventory (VMI) for the grab stock of mechanical items.
-
IECRead moreTo control the expansion of a silo park, engineering & construction company IEC called on Breemes. Being involved in the engineering from the beginning, the electrical service provider was able to make smart proposals for both the low-voltage part and the PLC control. ‘We have always been able to find each other well and when changes occurred, we were quickly on the same page with Breemes.’
-
Heliox - Charged for DeliveryRead moreHeliox, a developer and manufacturer of charging systems for electric buses and trucks, was already working with itsme when production still took place in the Netherlands. Today, production has shifted to Slovakia, Portugal, and Moldova, and is also happening in the US. itsme remains the “irreplaceable” partner for the supply of electrical components and cable harnesses.
-
BLOK System SupplyRead moreBlok System Supply and itsme have maintained an intensive relationship for many years. Early last year, this was further deepened with electronic data exchange via the Smart Connected Supplier Network. ‘It saves an enormous amount of time and reduces errors. We always have real-time information automatically.’ However, time for personal contact is not saved. ‘That is precisely what makes itsme a very nice party to work with.’
Why not take a look at these trainings we offer:
-
PROFINET CPNERead moreavailable in Dutch
-
PROFIBUS CPERead moreavailable in Dutch
-
WinCC-SCADA2Read moreavailable in Dutch
-
PCS7-SAFE V9Read moreavailable in Dutch