Rittal - RiLine Compact power distribution in the smallest space
RiLine Compact is the proven system solution for compact power distribution in enclosures and small switchgear cabinets. Various designs can be used, safely and without loss of space. RiLine Compact is standardized and standards-compliant.
Simple mounting
The RiLine Compact board in 160A design is available in widths matched to the width of the mounting plate of the VX25 system enclosure platform. Quick mounting is possible by direct mounting on the mounting plate or with mounting rails 35 x 7.5/15 mm.
Of course, drawings and other relevant data are available so that the digital twin can be easily created.
At the same time as the components are attached to the all-round touch-protected board by simple plug-in mounting, a secure electrical connection is simultaneously established.
Direct contacting on the board reduces the amount of cabling . This is important because different types of units are often used that require a lot of different wiring in a conventional setup.
For example, the motor control unit with electronic overload protection is designed particularly space-saving and requires 50% less space than a traditionally wired motor control unit.
Safe connection
With the adapters of the RiLine Compact system, quick connection of pipes and devices can be achieved. Thanks to the screwless connection technology of the connection adapter, the wires are quickly connected, the contact point itself is completely maintenance-free.
With their pre-assembled connection wires, the device adapters meet the specific requirements of IEC/EN 61 439 and UL.
Within the scope of a system type approval, the following tests were carried out at Rittal such as proof of short-circuit resistance such as nominal impact current resistance Ipk and nominal short-circuit current resistance Icw.
For the mechanical attachment and direct contacting of electrical devices to the board, device adapters are used. Different adapter versions are required for each desired phase connection. Thus, there is a separate 1-pole device adapter for L1-L2 and L3. Of course, a 3-pole version is also available.
Stay up to date with the latest news:
-
Rittal - AX & KX in stainless steel versions now availableRead moreSince 1 March 2024, Rittal's product range has been extended to offer AX wall/floor enclosures and compact KX enclosures in stainless steel versions. The sheet steel AX enclosure is widely used as a system cabinet for a wide variety of applications. Rittal is now coming out with a variant of this enclosure.
-
Rittal - VR pedestalRead moreDelve into the world of the VX plinth plinth system - a successor that takes your cabinet arrangement to the next level. More stability, but also flawless installation. Experience the evolution of your workspace today! Rittal strives to constantly refine and improve its products. As part of this process, the VX plinth plinth system has been redesigned this product has been available since 1 March 2024.
-
Rittal - Cable glands increase safety even in extreme conditionsRead moreThe importance of cable glands is sometimes underestimated. Wrongly so, because in many industries they contribute substantially to the proper functioning of operating equipment. The right cable gland protects any enclosure from quite threatening external influences such as dust and moisture. In extreme conditions such as arctic cold or tropical heat, it is the "heavy duty" cable glands made of nickel-plated brass or stainless steel that make the difference. Even bases, acids and chemicals hold them back. Glands provide safe passage of cables through panels to and from devices. They can insulate cabinets, provide grounding and strain relief, and protect against electromagnetic interference. There are also glands made specifically to withstand severe explosions or to provide sealing under water.
-
Rittal - Discover the Ideal Wall EnclosureRead moreExplore the perfect wall enclosure for your needs - the AX and KX sheet steel versions! But when do you choose which enclosure? The choice between AX and KX depends on your specific requirements. If you desire a wide range of dimensions and accessories, the AX series is the ideal option. The 25mm system grid in combination with the rail interior offers endless mounting possibilities. A notable feature is the bottom rail for interior mounting without drilling. The AX enclosure excels in versatile system accessories such as door hinges, cable entry options, cable routing on the door side, sloping roof, lifting eyes, swivel frame, lighting, and multiple cable entry options. The standard mounting plate ensures easy installation and equipotential bonding, and the use of the pedestal system, similar to Rittal's VX25 cabinet system, provides additional flexibility.
Check out our other success stories:
-
Dymotec - Open Lines in a ‘Perfect Storm’Read moreCOVID-19 and global component scarcity threw the industry into a ‘perfect storm’. Industrial automator Dymotec and Breemes kept the phone lines constantly open to tackle the scarcity problem together with creativity and proactivity. Dymotec in Olen (B) focuses on industrial automation spanning a broad spectrum of industries, from food and pharma to logistics and metal. The company has been around for 30 years and joined the Jeco Energies Group in 2022. Dymotec now has some 50 employees and also has a flexible shell with technicians, programmers and project engineers. Ever since its establishment, the company from Kempen has had a relationship with (the predecessors of) Breemes.
-
Enduro - Complete package for heavy-duty workRead moreEnduro Softslings builds machines for the manufacture of its own heavy lifting soft slings. For a new machine, it called in itsme for the full package: advice on the drives, supply of components and programming of the controls. “We completed the entire project in just over six months. That’s fast for such a specialised machine.”
-
Stimac - Good technical support for ever-changing specificationsRead moreIf the description for an automation project is clear from the start, it is easy for the industrial automation specialist to give it substance. In practice, however, specifications often change during the course of a project. This happened to Stimac/SNK when designing the control technology for a horticultural machine. For the problems that arose during the process, itsme quickly provided Stimac/SNK with a solution. “When a customer calls us, we respond immediately. So it’s nice to have a supplier like itsme who can also help immediately.”
-
Innovatec - Hatching Better ProcurementRead moreInnovatec Hatchery Automation launched a process of professionalisation for its procurement process last year. The company partnered with itsme because of its technical expertise, logistics concepts and intensive contacts with manufacturers. “First we were dating, but now we’re thinking about moving in together.”
Why not take a look at these trainings we offer:
-
TIAP-NETWORKRead moreavailable in Dutch
-
SIMOTION-SERVRead moreavailable in Dutch
-
SIMOTION-SYSTEMRead moreavailable in Dutch
-
TIAP-BASISRead moreavailable in Dutch