text.skipToContent
text.skipToNavigation
![]()
Industrial column drill with gear shift up to 35mm – DH35G
This new column drill is equipped with a powerful 2.2 kW motor and has a capacity of 35 mm in steel. The machine is equipped with electromagnetic drilling supplies; a simple press of one of the buttons in the handle turns the automatic power on and off. The automatic gear lubrication is done with oil pressure. In addition, this drill press also has a closed coolant system with cooling pump and chip filter and an integrated tap function.
New to this machine is the innovative membrane command panel. This is a “closed” panel with no possibility of dirt and grease entering the keys. This makes the panel easy to clean from grease and dirt.
Strenghts:
- Drill in steel up to 35 mm
- Powerful engine 2.2 kW
- Innovative membrane command panel
- Automatic gear lubrication via oil pump
- Electromagnetic automatic drilling feeds
- Integrated tap function
- Closed cooling system with cooling pump and filter according to the machine directive.
Suitable for:
- The better workplace, assembly companies, maintenance service, schools and training centers, general industry
Features:
- Heavy, solid cast iron version
- Electromagnetic drilling feeds, by simply pressing one of the buttons in the handle, the automatic feed is switched on and off.
- 3 drilling feeds present: 0.05 - 0.15 mm / rev.
- Powerful 2.2 kW high quality electric motor.
- Large 285 mm throat, allowing larger pieces to be machined.
- Spindle with precision ball bearing.
- Exceptional running accuracy thanks to hardened and precision grinded spindle.
- Gears are lubricated in an oil bath and lubrication occurs automatically by an oil pump. All gears and axles are rectified and hardened.
- Heavy, precisely machined work table with T-slots in diagonal pattern and rotatable around its own column 360°, with powerful clamping. By means of a solid rack, the table is simply adjusted to height.
- Integrated machine lighting
- Simpler tool change by automatic drill ejector
- Solid, large bottom plate with 2 parallel T-slots.
- Innovative membrane panelscanner: dirty and splash proof, easy to clean:
- Tap function (clockwise to a set preset depth and then automatically return to the left).
- Left and right turn
- Activate the cooling pump
- Adjustable drill depth adjustment with adjustable handle
Safety:
- User-friendly control knobs with separate start and stop pushbutton and separate emergency stop
- Zero voltage
- Motor protection
- 24V DC adapter
- Lockable main switch
- Solid "double" protection shield with micro switch, drill will immediately stop, when opening the shield
Standard delivery with:
- Optimum quick release drill bit 1-16 mm B16
- Arbor according to DIN228 MT4 B16
- English manual, inscriptions, CE marking, and CE certificate according to Machine Directive 2006/42/CE, and EMC Directive 2014/30 / CE.
Stay up to date with the latest news:
-
Rittal - VR pedestalRead moreDelve into the world of the VX plinth plinth system - a successor that takes your cabinet arrangement to the next level. More stability, but also flawless installation. Experience the evolution of your workspace today! Rittal strives to constantly refine and improve its products. As part of this process, the VX plinth plinth system has been redesigned this product has been available since 1 March 2024.
-
Siemens - SINAMICS G220 variable speed drive now also in IP55Read moreIn addition to the previously released IP20 variant of the SINAMICS G220 variable speed drive, the IP55 version of this innovative drive is now also available. This version comes standard with coated circuit boards that make the inverter resistant even outside the control cabinet to aggressive influences in a harsh industrial environment. As an option, a housing-mounted isolating switch can also be supplied to ensure safe disconnection of voltage without any other external components.
-
News - Fluke - 87-V digital multimeterRead moreTechnological advances now allow accurate electrical measurements to be taken during installation and maintenance using a digital multimeter (DMM), allowing technicians to diagnose problems that lead to premature failure.
-
Pilz: PSENmlock mini and PSENslock 2Read moreWhen securing fences, a wide variety of factors such as the fence type, the respective installation situation and the specific use must be taken into account depending on the application. For this purpose, Pilz is expanding its range in the field of safety interlocks with two new sensors immediately: PSENmlock mini for space-critical applications and PSENslock 2
Check out our other success stories:
-
Dymotec - Open Lines in a ‘Perfect Storm’Read moreCOVID-19 and global component scarcity threw the industry into a ‘perfect storm’. Industrial automator Dymotec and Breemes kept the phone lines constantly open to tackle the scarcity problem together with creativity and proactivity. Dymotec in Olen (B) focuses on industrial automation spanning a broad spectrum of industries, from food and pharma to logistics and metal. The company has been around for 30 years and joined the Jeco Energies Group in 2022. Dymotec now has some 50 employees and also has a flexible shell with technicians, programmers and project engineers. Ever since its establishment, the company from Kempen has had a relationship with (the predecessors of) Breemes.
-
Enduro - Complete package for heavy-duty workRead moreEnduro Softslings builds machines for the manufacture of its own heavy lifting soft slings. For a new machine, it called in itsme for the full package: advice on the drives, supply of components and programming of the controls. “We completed the entire project in just over six months. That’s fast for such a specialised machine.”
-
Stimac - Good technical support for ever-changing specificationsRead moreIf the description for an automation project is clear from the start, it is easy for the industrial automation specialist to give it substance. In practice, however, specifications often change during the course of a project. This happened to Stimac/SNK when designing the control technology for a horticultural machine. For the problems that arose during the process, itsme quickly provided Stimac/SNK with a solution. “When a customer calls us, we respond immediately. So it’s nice to have a supplier like itsme who can also help immediately.”
-
Innovatec - Hatching Better ProcurementRead moreInnovatec Hatchery Automation launched a process of professionalisation for its procurement process last year. The company partnered with itsme because of its technical expertise, logistics concepts and intensive contacts with manufacturers. “First we were dating, but now we’re thinking about moving in together.”