text.skipToContent
text.skipToNavigation
![]()
S7 SERVICE
SIMATIC S7 Service 300/400Course type
Siemens STEP7 ClassicIntroduction
In this course you will deepen your knowledge gained in the basic and advanced course and expand your knowledge in the field of troubleshooting in hardware, software and maintenance. Another focus of the course is to teach you skills for modifying an existing program. After this training, you will be able to find and eliminate errors faster. You increase your productivity by reducing system downtime.Target group
Electricians, mechatronic engineers, engineers, technicians, masters, skilled workers, service personnelForeknowledge
Module S7-BASIS or equivalent knowledge and experience.Goal
After this training, you will be able to find and eliminate errors faster. You increase your productivity by reducing system downtime.Content
- Structure of the hardware (mechanical / electrical).
- Addressing the input and output cards.
- Testing the hardware and the process.
- Structured commissioning of the program.
- Changing small bugs.
- Make a backup copy of the definitive program.
- Fault types (internal and external faults).
- Process investigation, use of documentation.
- Error in input and output cards / hardware diagnostics with STEP7.
- Change incorrect settings in the program; Timers, counters and data words.
- Fault analysis using I-STACK and diagnostics buffer for program and hardware errors.
- Practical exercises.
Duration
2 daysWhy not take a look at these trainings we offer:
-
PROFINET CPNERead moreavailable in Dutch
-
PROFIBUS CPERead moreavailable in Dutch
-
WinCC-SCADA2Read moreavailable in Dutch
-
PCS7-SAFE V9Read moreavailable in Dutch
Check out our other success stories:
-
TR Service - Future-proof low-voltage panelRead moreTR-Service provides industrial maintenance using all disciplines, from electrical and mechanical to hydraulic and pneumatic. With support from Breemes, the company installed a large low-voltage panel. ‘After discussing my summary plan with them, I decided to just do it,’ says director-owner Raoul Tielens. At Breemes' suggestion, the panel was future-proofed by preparing it for power monitoring.
-
Peeters - Young Company, New EquipmentRead moreSince its founding a few years ago, Peeters Robotic Solutions has been rapidly developing, working on projects both domestically and internationally and providing standard solutions for industrial palletizing. The company stays up to date with the latest technology, including Festo’s electrical and pneumatic drives. To achieve this, it relies on itsme. “Thanks to their expertise and skills, we can bring innovation to the forefront for our customers.”
-
Kusters - Putting weight behind itRead moreKusters was looking for a weighing solution for its banknote devaluation machines that was easy to integrate into the Siemens control system. Through itsme, they came into contact with the right knowledge carriers at Siemens. ‘For us as Kusters, itsme is not only a supplier but also a source of knowledge, with which we co-engineer certain components and process steps, such as this weighing system.’
-
Eneco - Green light for green electricity and steamRead moreEneco Bio Golden Raand, located in the port area of Delfzijl, converts biomass into green electricity and green steam. Each year, the plant processes approximately 300,000 tons of waste wood from the Netherlands and neighboring countries. As part of Eneco’s climate ambitions, a project began in 2022 to replace the existing fluorescent lighting in and around the boiler room. The project was carried out under the supervision of itsme. “Two factors were important in this process: the cost, of course, but also the level of service.”
Stay up to date with the latest news:
-
Festo - Save energy, increase productivityRead moreBecause pneumatics has a high power density, pneumatic components are widely used in machine lines. Smaller components are gaining popularity due to ease of use, energy savings and productivity gains.
-
Siemens - Scalable and Flexible Safety ConceptsRead moreSiemens offers a digital workflow that helps with every step of safe machine design. Through an integrated tool chain-from risk assessment and safety evaluation to hardware selection, engineering and validation-the process is streamlined and documentation efforts are minimised.
-
Schneider Electric - Modicon Edge I/O NTSRead moreModicon Edge I/O NTS, Schneider Electric’s latest IP20 distributed I/O system, is more than just an input/output system. It is designed to equip machine builders, system integrators, and industrial end-users with the tools they need to thrive in an increasingly data-driven digital world. The system's ability to aggregate and securely share data enables smarter decision-making and improved operational performance. With open Ethernet protocols for connectivity with a wide variety of devices and architectures, OPC UA technology for secure communication and interoperability, and built-in hardware cybersecurity, Modicon Edge I/O NTS helps ensure connectivity, performance, availability, and enhanced network security. Furthermore, the system complies with current cybersecurity regulations, enabling end-users to safely access and fully leverage their data — boosting industrial efficiency, flexibility, sustainability, and profitability.
-
Niedax - MTCRead moreThe Niedax MTC is a strong and stable click-on wire mesh tray available in various designs and shapes. Thanks to its unique integrated coupling system, the different sections can be quickly and easily clicked together.