text.skipToContent text.skipToNavigation

Avebe - A Good Night’s Sleep Thanks to FactoryScan

Companies often have no clear idea of the installed base of industrial automation in their factories and warehouses. With FactoryScan, itsme can provide an overview of the current status of automation components such as PLCs. Potato processor Royal Avebe uses the results to update their component stock and assess future availability. The scan is intended to reduce the number of hardware-related disruptions Process Control Engineer Johan Wierenga has to deal with. It also helps him sleep better, knowing the stock is up to date.


Avebe operates a factory in Gasselternijveen, where potato starch, protein, and by-products are produced. It's a typical seasonal business, with production running at full speed day and night during the potato campaign. Johan Wierenga, along with two colleagues, is responsible for industrial automation. During the campaign, any of them can be called at any time in case of a malfunction. If certain PLC or I/O hardware suddenly needs replacing, it’s crucial to have those parts in stock.

Creating and Enriching an Overview

This isn’t always standard practice in the industry, explains Arjen Schutte, Technical Sales Engineer at itsme and long-standing automation partner of Avebe. “Many companies don’t have a clear picture of their installed base. Something was built once and perhaps expanded later. Your car gets regular checkups and inspections, but industrial systems usually don’t. Components are only replaced when they break. And then it’s often unclear what’s even in use.”


The same was true at Avebe, Wierenga acknowledges. “When I started here, my focus was elsewhere. Initially, I didn’t pay much attention to what was in stock. Later, it became clear that our inventory needed improvement to meet current requirements. To make the right choices, you need a clear overview of the installed base. We're talking about over 4,000 Siemens parts spread across the site, from process components to standalone units. So when itsme offered to perform a FactoryScan via the network, I was all ears. It maps out everything without missing anything.”


“To make the right inventory decisions, the installed base must be mapped out.”

Want to know more about the FactoryScan?

Fill in the form and we will get back to you!

A FactoryScan can be as broad or focused as the customer wants, Schutte explains. “That depends on the time and resources available. In this case, it was limited to Siemens components—mostly PLCs and related parts, not drives or valves, which we could include as well.” itsme uses a Siemens tool that connects to a PLC and scans the network to create an overview of all connected components. This overview is enriched with data on current condition, availability, future stock status, and suitable replacements.


Ensuring Cybersecurity

The scan has already been completed at Avebe, says Wierenga. “We’re now discussing with itsme which components to order to optimize our inventory. Meanwhile, we're also taking the next step: defining a strategy for managing obsolete components. Our goal is to keep disruptions incidental rather than recurring. The scan helps us make the right decisions about replacing outdated components and managing stock levels.”


Availability can change at any moment, Schutte warns. “Siemens recently announced a new line of PLCs. That means the current line is now only available as spare parts—and in ten years, not at all.” Another factor is the Cybersecurity Act, which will soon come into effect. “Companies must take responsibility for protecting themselves against hacks. We don’t yet include this in FactoryScan, as anti-hack PLCs are only now entering the market.” In any case, cybersecurity is a growing concern in keeping the installed base current.

 

“We want a strategy for handling obsolete components.”

Improving Production Reliability

Could Avebe have done the scan themselves? Wierenga: “Probably, but it would’ve taken me a lot more time and effort—and I still wouldn’t be sure I had everything. So we thought it made sense to hire itsme. I only had to spend half a day with Arjen.” Schutte: “I can quickly see what’s on the network, but compiling the report takes a lot of time. I have to research and cross-check everything in Siemens’ database. We’ve been offering FactoryScan since 2022, and more than twenty companies have used it so far. That number keeps growing.”


Wierenga is satisfied with the scan. He now has a clear view of the installed base and no longer loses sleep over uncertainties. “The goal is to have a reliable system, ensuring consistent production with no unplanned downtime. That way, scheduled work can proceed without delays.”


 

 

Check out our other success stories:

  • TESTIMONIAL
    22 sep. 2025
    Van Meer - Quick Connection for Energy Storage
    Drive specialist Van Meer developed an energy storage system for heavy-duty drives and designed a custom battery system for it. For the connectors in the battery system’s cabinet, their regular supplier itsme recommended omni-brand partner Phoenix Contact. Excellent connectors — only the frame didn’t fit. Phoenix Contact quickly developed a customer-specific connector design. itsme now supplies Van Meer with complete connector sets, including the custom plug.
    Read more
  • TESTIMONIAL
    25 aug. 2025
    Elektro VV - The right expertise in the right place
    Elektro VV, based in the Belgian province of Antwerp, carries out general electrical work and solar panel installations for both companies and private individuals. For complex projects, the company calls on Breemes, which brings expertise such as low-voltage studies. “The challenge is to design a panel that can be built quickly and efficiently, and is future-proof.”
    Read more
  • TESTIMONIAL
    11 aug. 2025
    OI - Warm relationship with supplier
    The O-I glass factory in Leerdam produces 3.5 million beer bottles every day. The challenge of keeping production running 24/7 is tackled together with trusted supplier itsme. They ensure that technicians never run out of stock during maintenance and that critical components like cables and sensors are heat-resistant. This makes life much more relaxed for supervisor Patrick Maduro and his team in the electrical engineering department.
    Read more
  • TESTIMONIAL
    28 jul. 2025
    Kusters - Indian order
    Kusters, based in Venlo, supplies its banknote devaluation machines worldwide. It has a large installed base in India and its own limited company there. In 2022, an Indian customer requested the renewal of twenty machines. Kusters was able to win this large order with the help of itsme. The supplier now efficiently handles the electromechanical supply from its Venlo branch.
    Read more

Stay up to date with the latest news:

  • NEWS
    16 okt. 2025
    nVent Hoffman - WAS aluminium wall-mounted enclosure
    When protecting critical components in demanding environments, compromises are not an option. That is why the WAS aluminium single-door wall-mounted enclosure from nVent HOFFMAN is designed for one purpose: outstanding performance.
    Read more
  • NEWS
    9 okt. 2025
    ABB - OT plus converters
    With the OT Plus series, ABB introduces a new generation of converters specially developed for the demands of modern industrial applications. This updated line combines reliability with flexibility and supports efficient and safe installation – regardless of the environment or application.
    Read more
  • NEWS
    2 okt. 2025
    Siemens - IO-Link: The Power of Real-Time Data Exchange
    In an age where speed, efficiency and reliability are crucial, IO-Link provides the link between machines, sensors and your control systems. Thanks to direct data exchange and simple integration, you can get more out of your processes, reduce costs and lay the foundation for future-proof maintenance.
    Read more
  • NEWS
    29 sep. 2025
    Schneider Electric - Simplified wiring
    Thanks to intuitive spring clips, TeSys Deca Snap-In enables contactors and motor protection switches to be connected in just two seconds per wire. That is up to 96% faster than traditional connection methods.
    Read more

Why not take a look at these trainings we offer: